• Combat Gear Solenoid
  • BC Left next to Kip Solenoid
  • BC Solenoids installed in SMS Seydlitz

Combat Gear Solenoid

$40.00

Product Description

 

Combat Gear Solenoid

A Battlers Connection in house design. It is assembled and tested by the BC crew.

Developed around captains that want maximum flow, superior speed while being compact and light weight.

Without sacrificing durability our solenoids are all metal,No pressurized plastic parts!!!

 

These solenoids Feature:

  • Anodized 6061-T6 aircraft grade aluminum base
  • Electrophoresis coating on external steel components for rust prevention
  • 22 Awg wire leads
  • 360 degree wire lead positioning
  • Easy servicing design
  • Viton plunger seal
  • O-ring sealed cavity
  • Compact design 

Specs:

  • 2 port normally closed
  • Orifice 3mm
  • Flow ~26 CFM @ 150psi
  • Max effective operating PSI 150
  • Type Air
  • 2 Threaded 1/8 npt ports
  • Available voltage DC 6, 12, or custom
  • Power 7.2watt w/ 6volt coil
  • Current 1.2amps w/ 6volt coil
  • Length 2.25"
  • Diameter 1"
  • Weight 4.2oz (coil dependent)
  • 2 M3 threaded ports for mounting

 Uses Kip replacement pistons <Click>

Designed, assembled, and tested by the BC crew

Product Reviews

Write Review

  1. appearance, function, materials, cost 4 Star Review

    Posted by on Jan 13th 2017

    They look cool with black anodized finish and brushed stainless. It just goes with my silver and black "raiders" theme. The use of aluminum is something I highly applaud. Cost beats Kip solenoids to death and that is good coming in at about $40 verses $55 or $60. Initial testing resulted in some firing failures. This is due to some roughness on the inside of the actuator tube. I will be working on cleaning this up a bit before battle. The only other complaint is that the coil is a little bulky resulting in an extra tight fit in the stainless casing. That tight fit might cause the actuator tube to be slightly off center. It is unclear if this will affect function. A plus is that Kip actuators can be used as replacement parts. I purchased 5 of these solenoids so I will get a chance to test them in "bulk".

Quantity:
SKU:
CGSOL